Canada Tollfree:

Dlinkrouter.local Setup

Dlinkrouter.local Setup


Get The Best Guidance To Setup Dlink Router



Call Now - +1-888-873-9851



Dlinkrouter.local - Dlink router login and setup wizard

D-Link Corporation provides network technology solutions for consumers and businesses worldwide. It provides products to help its users connect with information and resources. D-Link manufactures a range of routers that define technology innovation with award-winning and high performance to suit every user’s budget. D-link wireless routers can be connected to your existing Cable or DSL modem to create a secure wireless network around the house or office. With these D-link routers, you can easily share photos, files, video, music, and much more throughout your home or office. D-link wireless routers come with the newest Wi-Fi technology which provides you ultra-fast speed of internet and let you enjoy uninterrupted video streaming and lag free gaming.


D-link routers web interface can be accessed through dlinkrouter.local to configure the settings of your route. Dlinkrouter.local provides you quick access to the control panel of the D-Link router with a wired Ethernet internet connection or wireless WIFI internet connection.


http.dlinkrouter.local setup and installation

D-link router setup through D-Link Quick Router Setup Wizard:


  • First, you will have to disconnect the power from your modem.

  • Then, you must take the included Ethernet cable and connect it from your computer/laptop to any one of the four LAN ports on your D-link router. Also, connect your modem to the D-link router at the internet port on your router.

  • Connect the whole computer system including the modem and router to power and turn it on.

  • Open the Internet browser from your computer and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar of your browser which will take you to the web interface of your D-link router.

  • D-Link Quick Router Setup Wizard will then open up on your screen, Click on Next to Begin with the D-link router setup process.
    Note: It is to be noted that the D-link quick router setup wizard only appears when you are configuring your router for the first time but if you have previously configured your D-link router, you must reset your D-link router to factory default settings for going ahead with the D-link router setup.

  • The Router setup wizard will perform a scan on your router to determine which type of internet service you are connected to for the internet setup on your router. Else you will be prompted to manually select your Internet Type- if it’s Cable or DSL internet network.

  • Then you will have to configure your wireless settings. You will have to enter a New Wireless Network Name and Password for connecting to your wireless internet network.

  • To log into the D-link router configuration setup page, you will have proceed with your D-link router login. You need to enter your D-link router default username and password for D-link router login. The default d-link router login username is admin and the password field should be left blank.
  • Move ahead to select your Time Zone according to your location.

  • A detailed summary of your wireless settings i.e. wireless network name and password is displayed. Keep them noted for further assistance.
  • Click on Save to save the entire configuration.

The D-link router then reboots to apply the new router settings and finally, the D-link router setup is complete.


D-link Router Setup Using WPS

D-link Router Setup Using WPS

  • Plug your wireless router into a nearby power plug and turn it on.

  • Wait until the D-link router LED starts blinking amber light, then, Press the WPS button on your D-link wireless router or your access point.

  • Within next minute, press the WPS button that is located on your d-link router following which, the LED will start to blink.

  • Unplug and move your router to a suitable location between your D-link wireless router and the area where you want maximum wireless coverage.

  • Go to the Wireless Utility settings on your router, click on wireless networks which will display Wi-Fi network names, select the Wi-Fi Network Name (SSID) for your D-link router.
    Note: When you use WPS for D-link router setup, the SSID on your router will automatically be assigned the name on different networks.

  • Your device is now connected to your D-link router and your D-link router setup is now complete!


D-link router login – access dlinkrouter.local

you must first ensure that you are connected to you D-link router either wirelessly over Wi-Fi or through a wired Ethernet connection for accessing dlinkrouter.local. You cannot access the web interface of your D-link router in case you are not connected to the internet network.



  • Open a web browser on your computing device as PC and visit the default D-link IP address of the router i.e. 192.168.0.1 or http://dlinkrouter.local

  • The D-link router admin page will open to configure D-link router settings.

  • Enter the D-link router login username and password details.

  • Enter the D-link router username – admin and password field should be left blank.

  • Click on Log In option.

D-link router IP

  • The default D-link router IP is 192.168.0.1

  • The D-link router default username is admin.

  • The D-link router default password is nothing and the password field should be left blank.

D-link router password

D-link router wireless password change


  • Open a web browser on your computing device as PC and visit the default D-link IP address of the router i.e. 192.168.0.1 or http://dlinkrouter.local

  • The D-link router admin page will open to configure D-link router settings.

  • Enter the D-link router login username and password details.

  • Enter the D-link router username – admin and password field should be left blank.

  • Click on Log In option.

  • Go to the Settings tab and click on Wireless from the drop-down menu.

  • Click on the Password field, type a new wireless password for the desired wireless band.

  • Make sure that you enter different passwords for 2.4 GHz and 5 GHz bands. Wireless clients will need this password in order to access your wireless network.

  • Click on Save to save your settings.

D-link router SSID/network name change

D-link router SSID/network name change


  • Open a web browser on your computing device as PC and visit the default D-link IP address of the router i.e. 192.168.0.1 or http://dlinkrouter.local

  • The D-link router admin page will open to configure D-link router settings. Enter the D-link router login username and password details.

  • Enter the D-link router username – admin and password field should be left blank.

  • Click on Log In option.

  • Go to the Settings tab and click on Wireless from the drop-down menu.

  • Type in a new SSID name in the given field. You must enter a different SSID for both the 2.4 GHz and 5 GHz wireless networks.

  • Click on Save Settings to save your wireless configuration.

D-link router login password change

  • Open a web browser on your computing device as PC and visit the default D-link IP address of the router i.e. 192.168.0.1 or http://dlinkrouter.local

  • The D-link router admin page will open to configure D-link router settings. Enter the D-link router login username and password details.

  • Enter the D-link router username – admin and password field should be left blank. Click on OK or Log In.

  • Click on the Tools tab and then click on Admin on the left.

  • Enter a new password in the Admin Password section to change your D-link router login password.

  • Click on Save tab to save the new login password settings.

D-link router reset

To perform a factory reset, please follow the steps below.


  • With your computer system on, place a paper clip into the reset whole located on the back of your D-link router for 10 seconds and then release it.

  • Your D-link router will then reboot on its own. The d-link router is reset after the WLAN light on your router stops blinking.

  • Resetting your D-link router changes all the router settings back to factory defaults.

D-link router firmware –using dlinkrouter.local

  • Download the latest version of the firmware for your D-link router from http://support.dlink.com or from your local D-Link support website.

  • After downloading the new firmware version, unzip the ZIP file to a location from where you can easily locate it.

  • Open a web browser on your computing device as PC and visit the default D-link IP address of the router i.e. 192.168.0.1 or http://dlinkrouter.local

  • The D-link router admin page will open to configure D-link router settings. Enter the D-link router login username and password details.

  • Enter the D-link router username – admin and password field should be left blank. Click on OK or Log In.

  • On the D-link router web page, Click on the Advanced at the bottom.

  • Click on the Tools tab or Maintenance tab which is located at the top of the page and then click on either Firmware or Firmware Update from the displayed menu on the left-hand side.

  • Click on the Browse button and locate the file that you had downloaded and then open it.

  • Click on Upload option to proceed with the firmware upgrade process. This would take about two minutes for the firmware upgrade to complete.

  • A confirmation window will appear after the completion of the firmware upgrade process. Click on Continue when it appears.

  • Your D-link router firmware has now upgraded.

How can I check what is the firmware version running on my D-link router?

  • Open a web browser on your computing device as PC and visit the default D-link IP address of the router i.e. 192.168.0.1 or http://dlinkrouter.local

  • You will find the D-link router’s firmware version located at the top of the page.

My D-link router is dropping connection. How can I fix this?

If your D-link router is not performing properly and you are facing freezing connection, your router is automatically rebooting or disconnecting and if you are facing slow wireless speeds or low wireless signal, there must be many reasons for router’s nonfunctioning. To resolve the issue, you can check the following:


  • You must ensure that you have kept your D-link router in a well ventilated area. This is because if your router does not get an adequate airflow, it may overheat and result in performance degradation.

  • It is very important to consider that your router firmware is up to date. Firmware serves as the "brain" of any router and is required for smooth functioning of your router. D-Link releases new firmware versions whenever bugs are reported, therefore, upgrading the firmware to a new version solves any issues related to its functioning.

  • Performing a factory reset on any router can solve many technical problems easily.

Troubleshooting – unable to access your D-link router on 192.168.0.1!!

  • Verify the physical connections by checking if there are solid link lights visible on the Ethernet ports of the device. If you do not see a solid ink light, you must try to connect to a different port on your router using a different cable. Also, make sure you have turned your computer on as the link light may not be on if your computer is turned off.

  • Try to reset your D-link router by pressing and holding the reset button on the back of your D-link router for 10 seconds when it is powered on. Then release the reset button and wait until your D-link router boots up. Try to perform D-link router login once again to access dlinkrouter.local or 192.168.0.1.

  • Try to access the D-link router on 192.168.0.1 through a different web browser on your computer.

  • Disable any Internet security software like anti-virus/firewall software running on your computer as these block access to your d-link router's configuration pages.

  • If you are still unable to log into your D-link router, perform the power cycle on your router. Power off your computer and wait for about 20 to 30 seconds. Turn on your computer and wait for all the router lights to stabilize.

The status light on D-link router is flashing, what to do?

If the Status light is continuously on or stays off, try following:


  • Power cycle your router: Power off your D-link router and for almost 20 to 30 seconds and then Power it on again and check for the Status light.

  • Perform the factory reset procedure for your D-link router.

http dlinkrouter local 192.168 0.1 and www http dlinkrouter local